Online Design Form - Microelectrode Array

Untitled Document
Microelectrode Array (MEA)
The Microelectrode Array has been design to take on many different geometries and electrode layouts for a multitude of expiremental protocols.

Originally designed for chronic use applications the MEA's are equally effective for acute studies as well. The number of contacts, length of each one, the Impedance and distance between electrodes are all custom designed.

Micro Electrode Array
× Fields marked with (*) are required
    Contact Information
  1. Principal Investigator name:(*)
    Please type your full name.
  2. Institution Name :(*)
    Invalid Input
  3. Institution Address:
    Invalid Input
  4. Telephone Number:
    Invalid Input
  5. Email:
    Invalid email address.
  6. Researcher’s name:(*)
    This field is required
  7. Researcher’s email:(*)
    This field is required
  8. General Specifications
    Micro Electrode Array
    • E = Epoxy Length below connector.
    • L = Length of wire beyond Carbo Wax.
    • Rs= Distance between rows.
    • Es : Distance between electrodes.
  9. 1. Metal Type:(*)
    Invalid Input
  10. 2. Include Polyimide tubing?(*)
    This field is required
    (Outside Polyimide tubing suggested for electrodes longer than 5 mm extending from the Epoxy)
  11. Invalid Input
  12. Invalid Input
  13. 3 .Number of Electrodes(*)
    This field is required
  14. 4. Electrode Impedance Value(s)
    Invalid Input
  15. Physical Measurements
  16. 5. (L) Length of electrode beyond epoxy:(*)
    This field is required
  17. Invalid Input
  18. 6. (E) Epoxy length below connector: (*)
    This field is required
  19. Invalid Input
  20. 7. (Es) Distance between electrodes:(*)
    This field is required
  21. Invalid Input
  22. 8. (Rs) Distance between rows(*)
    This field is required
  23. Invalid Input
  24. 9. Include a reference electrode/wire?(*)
    This field is required
  25. Invalid Input
    Typical: Same metal as recording electrode with 10 kΩ impedance (including within the array).
  26. Invalid Input
  27. 10. Include a Ground wire?(*)
    This field is required
  28. Invalid Input
  29. Invalid Input
  30. Invalid Input
  31. 11. Number of rows: (*)
    This field is required
  32. (*)
    Numeric value.
  33. Recording channel pinout
    Channel Pinout Advertence
    To ensure your complete satisfaction, MicroProbes for Life Science will provide a photograph and copy of the pin layout mapping and corresponding microelectrodes, including reference and ground, with your shipped order.

    Connector pin assignments will reflect connector pin numbers NOT headstage channel numbers

    Your Custom Design and Layout Sheet

    Make drawing as clear as possible with all dimensions clearly labeled, including connector Manufacturer & Model #, if different from those specified above:

  34. Upload a file:
    Invalid Input
    Allowed file types: bmp, gif, jpg, jpeg, png, doc.
  35. Connector and Headstage
  36. 12. Connector(s)
      Please select one(*)

    This field is required
  37. (provided by the customer)
    Invalid Input
  38. 13. Provide us with the brand and model of your recording and/or stimulation system (*)
    This field is required
    Please include headstage and any special configuration
  39. About your order
  40. How many of this MEA design do you wish to order(*)
    Numeric Value
  41. Special requirements
    Invalid Input
  42. How did you find us?

    Invalid Input
  43. How should we contact you?