Online Form - Nerve Cuff

Nerve Cuff - Standard, Microcuff and Nanocuff
The Nerve Cuffs are made out of biocompatible materials, they are mechanically flexible and can be provided in many geometric configurations and a wide range of sizes.

Nerve Cuffs can be used for acute or chronic experiments.

The number of contacts, distance between them, the inner diameter are all custom designed.

Nerve Cuff Standard and Microcuff
× Fields marked with (*) are required
    Contact Information
  1. Principal Investigator name:(*)
    Please type your full name.
  2. Institution Name :(*)
    Invalid Input
  3. Institution Address:
    Invalid Input
  4. Telephone Number:
    Invalid Input
  5. Email:
    Invalid email address.
  6. Researcher’s name:(*)
    This field is required.
  7. Researcher’s email:(*)
    This field is required.
  8. General Specifications
    Standard Nerve Cuff
    • d = Inner diameter.
    • x = Spacing between contacts.
    • n = Number of contacts.
    • y = Distance from the end of the contacts to the end of the cuff.
    • s = Teflon insulated stranded Stainless Steel lead.
    • Stranded Stainless Steel leads teflon insulation 300mm long (typical)

    Typical Specifications
    Variable Description
    y Three times distance between contacts, to provide maximum isolation.
    s 300 mm long
    Standard (1.0 - 5.0 mm i.d.)
    Contact material & thickness d=inner diameter (i.d.)
    * Recommended for stimulation
    125 µm stranded Stainless Steel 1.0 - 5.0 mm
    100 µm Platinum 1.0 - 2.0 mm
    * 250 µm Platinum 2.0 - 5.0 mm
    Microcuffs (0.75, 0.5 and 0.3 mm i.d.)
    Contact material & thickness d=inner diameter (i.d.)
    100 µm Platinum 0.5 - 0.75 mm
    25 - 50 µm Platinum/Iridium 0.3 mm
    Nanocuffs (56 - 250 µm i.d.)
    Contact material & thickness d=inner diameter (i.d.)
    25 µm Platinum/Iridium 160 - 250 µm
    12.5 µm Platinum/Iridium 56 - 140 µm
    Design Specifications
  9. 1.(d) Inner diameter(*)
    Invalid Input
  10. Question 2 will be available only after answering question 1
  11. 2. Inner Diameter for Standard:(*)
    Invalid Input
  12. 2. Inner Diameter for Microcuff(*)
    Invalid Input
  13. 2. Inner Diameter for Nanocuff(*)
    Invalid Input
  14. 2b. Please select the metal for your contacts (standard)(*)
    Invalid Input
  15. 2b. Please select the metal for your contacts (standard)(*)
    Invalid Input
  16. 2b. Please select the metal for your contacts (microcuff)(*)
    Invalid Input
  17. 2b. Please select the metal for your contacts (microcuff)(*)
    Invalid Input
  18. 2b. Please select the metal for your contacts (nanocuff)(*)
    Invalid Input
  19. 2b. Please select the metal for your contacts (nanocuff)(*)
    Invalid Input
  20. 3. (n) Number of contacts:(*)
    Numeric value
    (1 - 9 rings)
  21. 4. (x) Distance between contacts:(*)
    Numeric value
    (mm)
  22. 5. (y) Distance from the last contact to the edge of the cuff:(*)
    Numeric value
    (mm) - Typical three times distance between contacts, to provide maximum isolation.
  23. 6. (s) Length of the stranded SS leads (*)
    Invalid Input
  24. Numeric value
    (mm)
  25. Please select the desired angle of the leads leaving the cuff
    Invalid Input
  26. Do you require the leads with silicone encapsulation
    Invalid Input
  27. Invalid Input
  28. Please describe
    Invalid Input

  29. 7. Do you require sutures threads embedded in the cuff?(*)
    This field is required.
  30. 8. Connector(s): (*)










    This field is required
  31. (provided by the customer)
    Invalid Input
  32. About your order
  33. How many of this Nerve Cuff design do you wish to order?(*)
    Numeric Value
  34. Special requirements
    Invalid Input
  35. How did you find us?



    Invalid Input
  36. How should we contact you?