Online Design Form - X-wide Contacts Cuff

X-wide Contacts Cuff
The Nerve Cuffs are made out of biocompatible materials, they are mechanically flexible and can be provided in many geometric configurations and a wide range of sizes.Nerve Cuffs can be used for acute or chronic experiments.

The key utility for these cuffs is that the large electrodes' contacts area are ideal for studies requiring high current levels and when using kilohertz electrical stimulation to achieve block of activity in peripheral nerves. The reduced impedances are ideal for making sure the output of stimulation sources is not attenuated, there are not destructive charge densities building up, and true block of nerve activity is achieved.

X-wide contacts - Side view
× Fields marked with (*) are required
    Contact Information
  1. Principal Investigator name:(*)
    Please type your full name.
  2. Institution Name :(*)
    Please type your institution name.
  3. Institution Address:
    Please type your institution address.
  4. Telephone Number:
    Please type your telephone number.
  5. Email:
    Invalid email address.
  6. Researcher’s name:(*)
    Please type your researcher’s name.
  7. Researcher’s email:(*)
    Please type your researcher’s email.
  8.  

    General Specifications
    X-wide contacts
    • d = Inner diameter.
    • x = Spacing between contacts.
    • n = Number of contacts.
    • y = Distance from the end of the contacts to the end of the cuff.
    • s = Stranded Stainless Steel leads teflon insulation 300mm long (typical.)
    • W = Wide of the contact, Platinum/Iridium 90/10

     

    Design Specifications
  9. 1. Select one of the options(*)
    Invalid Input
  10. Sciatic Specifications
    Invalid Input
  11. Tibial Specifications
    Invalid Input
  12. Cervical Vagus - Cuff Specifications
    Invalid Input
  13. Subdiaphragmatic Vagus - Cuff Specifications
    Invalid Input
  14. (d) Inner diameter(*)
    Invalid Input
  15. Inner Diameter for Standard:(*)
    Invalid Input
  16. Inner Diameter for Microcuff(*)
    Invalid Input
  17. (x) Distance between contacts:(*)
    Numeric value
    (mm)
  18. (y) Distance from the last contact to the edge of the cuff:(*)
    Numeric value
    (mm) - Typical three times distance between contacts, to provide maximum isolation.
  19. Please provide the following additional information:

  20. 2. (n) Number of contacts:(*)
    Numeric value
    (1 - 9 rings)
  21. 3. (s) Length of the stranded SS leads (*)
    Invalid Input
  22. Numeric value
    (mm)
  23. 4. Please select the desired angle of the leads leaving the cuff
    Invalid Input
  24. 5. Do you require the leads with silicone encapsulation
    Invalid Input
  25. Invalid Input
  26. Please describe
    Invalid Input
  27. 6. Do you require sutures threads embedded in the cuff?(*)
    This field is required.
  28. Your Custom Design and Layout Sheet

    Please upload your file with your custom specifications (if applicable):

  29. Upload your custom design here
    Invalid Input
    Allowed file types: bmp, gif, jpg, jpeg, png, doc.
  30. Connector and Headstage
  31. 7. Connector(s): (*)





    This field is required
  32. (provided by the customer)
    Invalid Input
  33. Please select one(*)








    This field is required
  34.  

  35. 8. Provide us with the brand and model of your recording and/or stimulation system (*)
    This field is required
    Please include headstage and any special configuration
  36. About your order
  37. How many of this Nerve Cuff design do you wish to order?(*)
    Numeric Value
  38. Special requirements
    Invalid Input
  39. How did you find us?



    Invalid Input
  40. How should we contact you?