Online Design Form - MEA for the EDDS Microdrive

The EDDS Array provides a mechanical positioning system for chronically implanted 1D, 2D and 3D arrays. Compared with fixed implants the EDDS Array Microdrive allows precise repositioning of the electrodes in depth which increases the yield and flexibility during chronic recordings.

The maximum depth of penetration of an Microelectrodes Array (MEA) using the EDDS Array Microdrive is 7.5 mm. Further, implantation and reusability are simplified to a large degree.

Fields marked with (*) are required

Contact Information

Please type your full name.
Invalid email address.
Invalid Input
Invalid Input
Invalid Input
Invalid Input
This field is required

Metal Type, Connector & Headstage

This field is required.
This field is required
Invalid Input
This field is required

Physical Measurements

This field is required
This field is required
This field is required
Invalid Input
This field is required
Numeric Value
This field is required
Numeric Value
This field is required
Numeric Value
This field is required
Invalid Input
Invalid Input
This field is required
Invalid Input
Invalid Input
This field is required

Recording Channel Pinout

Channel Pinout Advertence
To ensure your complete satisfaction, Microprobes for Life Science will provide a photograph and copy of the pin layout mapping and corresponding microelectrodes, including reference and ground, with your shipped order.

Connector pin assignments will reflect connector pin numbers NOT headstage channel numbers

Your custom design and layout sheet

Please upload your file with your custom specifications (if applicable):

Invalid Input

About Your Order

Numeric Value
Numeric Value
Numeric Value
Invalid Input