Online Design Form - Custom Microwire Array

Fields marked with (*) are required

Contact Information

Please type your Principal Investigator name.
Invalid email address.
Please type your Institution name.
Enter Street, City, State, and Zip Code
Invalid Input
Please type your Researcher’s name.
Please type your Researcher’s email.

General Specifications

Microwire Array
  • E = Epoxy length below connector.
  • C = Length of wire covered with Carbo Wax (PEG).
  • L = Length of wire beyond Carbo Wax.
  • D = Include an Epoxy Blob.
  • Rs= Distance between rows.
  • Es= Distance between electrodes.
Impedance values per Metal type and Wire size
Metal type and thickness inner diameter (i.d.)
25 micron Pt/Ir 0.4 to 0.8 MΩ
50 micron Pt/Ir 0.2 to 0.4 MΩ
25 micron SS 0.6 to 0.9 MΩ
50 micron SS 0.4 to 0.6 MΩ

Design Specifications

This field is required
This field is required
This field is required
Numeric value

Physical Measurements

This field is required
Invalid Input
This field is required
Invalid Input
This field is required
Invalid Input
This field is required
Invalid Input
This field is required
Invalid Input
This field is required
Please select one
This field is required
Invalid Input
This field is required
Invalid Input
This field is required
Invalid Input

Connector and Headstage

This field is required
Invalid Input
This field is required

Recording Channel Pinout

Channel Pinout Advertence
To ensure your complete satisfaction, MicroProbes for Life Science will provide a photograph and copy of the pin layout mapping and corresponding microelectrodes, including reference and ground, with your shipped order.

Connector pin assignments will reflect connector pin numbers NOT headstage channel numbers

Your custom design and layout sheet

Make drawing as clear as possible with all dimensions clearly labeled, including connector Manufacturer & Model #, if different from those specified above:

Invalid Input

About Your Order

Numeric Value
Invalid Input
Invalid Input